There are several warnings when go to use this software with this radio because of the huge number of different firmware versions (and they are not upgradable).
CHIRP software has many features, some of which are not available using the BaoFeng factory software, such as: Uses the familiar RX frequency and ± Offset for repeaters, Allows 7 Character Alpha Tags (was only 6), Upper & Lower Band Limits for TX on VHF & UHF, Remembers the COM port setting between sessions, Remembers the last folder loaded from or saved to between sessions Supports serial ports up to COM256, Displays the actual Firmware release on the BaoFeng Radio, CHIRP is supported on Windows 2000/XP/Vista/7/8.1/10. Think of this as your How To Program the BaoFeng UV-5R For Dummies which will walk you through each step necessary to program the BaoFeng UV-5R. Then save the image file.
Apart from being the market leader, BaoFeng is the most budget-friendly option for ham radios. The rest of the channels can be filled by finding the frequencies for your local repeaters and using them to finish off the programming. Frequency band should be 136-174 MHz (VHF)/ 400-520 MHz (UHF).
CHIRP is free open source software anyone can download. I have set mine to COM3 and if you look up a couple images you will see that it matches what was shown in the device manager.
TalkieMan.com is a participant in the Amazon Services LLC Associates Program. MTR01 (use Radioddity R2) TDXone. But as popular as it is, the BaoFeng radio is quite difficult to program.
With default security settings, you will need a special procedure to run it: Application Security in 10.9.
Then press the MENU button and select Button 27 in order to go back to your desired memory channel. Location, will be your state, Distance, will be the county you are in, and Band will be the band of your radio which in this case, since we are locating VHF frequencies 2 meters (144MHz) will be what we are searching. But having said that, it is vital that you thoroughly go over the instructions manual and user guide provided to follow any steps for that particular model in order to experience a seamless setup and impeccable performance. Subscribe to our Email Newsletter Logout. Ensure that that the A side is used to program channels into the radio; otherwise, your data will not be saved.
First, we will start with the VHF frequencies.
Baofeng USB Programming Cable; Reverse SMA … The operation will be canceled if an incorrect frequency band is chosen. Press the down arrow key, select OFF, menu, and then exit. Most BaoFeng radios support both the UHF and VHF frequencies and can work in 12.5 KHz (narrowband) or 25 KHz (wideband). Or you can press it for the second time which will bring up the ‘ENG’ option. Now, this is what I hope to share with you in this article. Step 14: Assign the transmit frequency to the channel. Chirp.app is unsigned. The Baofeng UV-5R is a great cheap little radio, but it's notoriously difficult to use, with poor documentation. Of course you will need a computer (Windows, Mac, or Linux) and the best free BaoFeng programming software is CHIRP which can program the BaoFeng UV-5R as well as many other radios. I bought two so I could use one in my car as a mobile while carrying around a second. To monitor the frequency when you have TSQL turned on press the top orange button on the side of the radio and that will manually open the squelch so you can listen for other traffic. Mac OSX and Linux users are recommended to use a Virtual Machine to run the VIP Windows programming software. That is: If FW Message 1 contains “VER,” the message two will include the firmware version. The easiest way to fix this is once you have done the upload and it gives you the error seen above, turn off the radio, close the current radio configuration tab, open a new configuration tab and download the radio’s configuration into that. We use cookies to ensure that we give you the best experience on our website. Bienvenue dans le magasin Baofeng en France. For easier initial frequency programming, copy and paste, and importing frequency files from previous radios - you may want to consider using the CHIRP Programming Software found above. Step 10: Enter the transmit CTCSS/DCS code. More useful tidbits can be found at MacOS Tips.
We’re going to program a Baofeng radio with CHIRP software. Once this is complete, please press “OK” and the device will begin the cloning process. WARNING: Operating this radio on one of the following restricted frequencies without a license or authorization by the FCC can result in a variety of enforcement actions, including seizure of equipment, fines and other criminal penalties: 136 MHz – 137 MHz (Aviation Services, Part 87); 137 MHz – 138 MHz (Satellite Communications, Part 25); 138 MHz – 144 MHz (not available to any FCC licensee – Federal use only); 156.7625 MHz – 157.0375 MHz (Maritime Services, Part 80 and Aviation Services, Part 87). Step 5: (important tip) Delete the channel to be added. How To Configure an Application Specific Setup, https://chirp.danplanet.com/projects/chirp/wiki/Download. To enter the CTCSS code, press menu > 13 > enter code XXXX > menu > Exit, To enter the DCS code: Press MENU > 12 > menu > choose code XXXX > Menu > Exit, To do this; press MENU > 27 (Memory channel) > MENU > enter channel number XXXX > Menu > Exit, Step 1: Press VFO/MR to enter the frequency mode, Step 2: Press A/B or Axit/B and choose the A display, Step 3: Press BAND for the frequency band and select 136MHz (VHF) or 470 MHz (UHF). If you talk into one radio and hear it on the other, you have successfully managed to program the BaoFeng UV-5R. Then, power off the BaoFeng radio. BaoFeng radios can give a power output of up to 8 watts as well as channel steps for as low as 2.5 KHz. Step 9: Enter the transmit frequency shift. Next, push the Button 40, labeled as ‘Reset All,’ before pressing the MENU button again. Your email address will not be published. The Baofeng UV-5R is a great cheap little radio, but it's notoriously difficult to use, with poor documentation. To do this, you change the default slot number from 25 to whatever number of channels you intend to add. It is essential to turn off the TDR if programming from the radio.
When used in conjunction with turning on the name feature the display on your radio will show this instead of the frequency. This is to say that the device may no longer be able to transmit. Click the link that says “More info” shown above and you should see the next screen: You can now click the “Run anyway” button at the bottom and continue the installation of CHIRP on your computer. You might for example just program the radio using the keys if you need to enter just a few memories or you are out in the field with no access to programming software or cables. Step 6: We will need to search your local area’s available channels. To set the position of these frequencies in your radio, you will notice a tool bar that can allow you to easily set the frequencies in your radio. Step 4: Setting the Stepping Frequency and the Tone of CTSS, Step 5: Setting up the Memory Channel and Transmitting Frequency.
Baofeng UV-5R on Amazon. If this is a deal-breaker, you can check other models such as the This will enable your radio to communicate with your computer. MENU > 25 > MENU >enter 1 for positive shift or 2 for negative shift > MENU > EXIT.
You might for example just program the radio using the keys if you need to enter just a few memories or you are out in the field with no access to programming software or cables. It offers an easy to use interface compatible with Windows, Mac, and Linux PC’s. Note in the following image I have put in a name such as “HNTS 27”. The makers ensure that you get more than your money’s worth. Programming a BaoFeng Radio: Step By Step Guide. Once the download is complete you might see the following screen from Windows: This is NOT because the file you downloaded is harmful, it is because Windows Smartscreen does not recognize the file and since it is an executable file, it is a little over cautious.
GT-3TP (use Baofeng BF-F8HP) GT-890 (Variant of QYT KT8900) Standard Horizon (see Yaesu) Surecom. The first time you run CHIRP you might see a pop up box that says that error reporting is enabled, you can just click OK and move on. Once this information is selected, please select “OK” to continue. The steps mentioned above provides you with a general overview that you can implement for any radio you own by this reputable brand. But before that, you need to click on the orange colored button labeled ‘VFO/MR’ which will take you to the frequency mode. Additionally, all Baofeng radios, such as the UV-5R V2+ / BF-F9 V2+, will be distributed in ‘restrict’ mode. MENU > 28 > MENU > Channel number > MENU > Exit. Next, since this is a dual band radio, we will need to import all the UHF channels. The programming cable for these radios are sold separately. I much prefer the software as it allows me to quickly go back in and make changes and then upload those changes to the radio(s) and since there are so many excellent videos on how to change the settings in the radio I will concentrate on using the software. Baofeng official website provides you with the most cost-effective long-range Baofeng two-way radios and meets all your amateur and commercial need. Press the VFO/MR mode on. With OEM, ODM ability, quotation for bulk order is available. Windows XP users may need to follow the instructions here if you have trouble starting CHIRP. That is firmware message 1 and firmware message 2. The image above is the default way I program the BaoFeng UV-5R. Once on the CHIRP website click the link that says Click here to download the latest Windows version (or the link for Mac OSX or Linux), you will see the following screen for Windows users (Mac and Linux will be similar but from here on out I will only be showing the Windows version): From this screen you want to click on the chirp-daily-xxxxxxxx-installer.exe link (where xxxxxxxx is the date of the file) which will start the download.